PCB Conformal Coating ( Acrylcoat - ALQ-30 )

We are a reputable Manufacturer, Supplier, Exporter of PCB Conformal Coatings and Acrylcoat Conformal Coatings. Our operations are based in Pune, Maharashtra, India. We target customers from ALL OVER THE WORLD.

Conins Acrylcoat is a high-quality, flexible, and transparent acrylic conformal coating specifically designed for PCB assemblies. It is an eco-friendly solution that offers excellent protection against moisture, oxidation, fungus, and other environmental factors, particularly in highly humid conditions. The coating is easy to apply, dries quickly, and exhibits good flexibility.

Conins Acrylcoat is approved by C-DOT and conforms to the MIL Standard: MIL-I-46058C Type AR. It provides reliable protection for PCBs and components, ensuring their longevity. Additionally, the coating is solderable, simplifying the process of servicing and rework.

With its high dielectric strength, Acrylcoat safeguards against high voltage arcing and corona shorts, ensuring the safety and integrity of the PCBs.

Conins Acrylcoat ensures total protection for PCBs and components against moisture, Oxidation, fungus etc., in extremely humid conditions. It is easy to apply and fast drying and has good flexibility. Servicing is easy as the coating is readily SOLDERABLE. Acrylcoat has high dielectric strength and it provides protection against high voltage arcing and corona shorts.

Special Features:

100% Eco - Friendly
Economical in use.
Good Dielectric strength
Excellent adhesion to all Conformals
Easily SOLDERABLE ; Servicing is easy.
Prevents fungus growth
Protects component leads from corrosion
Fast curing
Contains UV Tracer for easy inspection

Key Features:

AEROSOL : Ensure the Conformal is thoroughly cleaned before application. Spray Acrylcoat evenly from a distance of 25 cm onto the Conformal. Allow the PCBs to air dry. For optimal results, curing in a ventilated oven at 60oC for 1 hour is recommended. It is advisable to heat the boards to 55 to 60oC before spraying. Shake the aerosol bottle well before each application.
LACQUER: Acrylcoat Lacquer can be applied using brushing, dipping, or spraying methods. It can be utilized in a dip coating machine or applied with a dispenser.
REMOVAL: The coating can be effectively removed using Conins Thinner ELCLEAN.
STORAGE: Store the product in a cool and dry place below 40oC. Keep it away from open flames or flammable materials, as the contents are highly inflammable. Discard the container after use.
PRECAUTIONS: Acrylcoat is a flammable material. Avoid contact with the skin, eyes, and inhalation.
- Skin: Wash the affected areas with soap and plenty of water.
- Eyes: Flush with plenty of water. If irritation persists, seek immediate medical attention. Keep the product away from open flames and flammable materials. Use it only in adequately ventilated areas. Refer to our Material Safety Data Sheet (MSDS) before using the product.
Shelf Life : The aerosol has a shelf life of 2 years, while the lacquer has a shelf life of 1 year, both when stored in their original sealed containers.
Packing : Available in 500 ml aerosol spray containers and 1 litre, 5 litres, and 25-litre containers for the lacquer.
LQ : 1 litre, 5 litres, and 25 litre containers.
Approved by C-DOT. Conforms to MIL 46058C Type AR.

PRODUCT CODE	Acrylcoat - ALQ-30
Appearance (Liquid & Coated Film)	Clear / Transparent / Smooth & Glossy
Specific Gravity (Density@25^oC)	0-85 to 0.9
Viscosity @25^oC	30-35 sec (Zans G1 Cup)
Flash Point	<40
Comparative Tracking Index (CTI Value)	600
Coating Thickness (Single / Double Light Coat )	20-22 Recomonded
Dielectric Strength	30 KV/mm
Thermal Cycling (MIL-I-46058-C-AR)	Meets Approval (C-DOT)
Moisture Resistance (MIL-I-46058-C-AR)	Meets Approval (C-DOT)
Insulation Resistance	Meets Approval (C-DOT)
Fungus Resistance	Passes
Withstand Temperature (Film)	-50 to 130^oC
Coverage Area (20 Î¼m Film 500 ml Aerosol)	6m2
Film Traceable	Under UV Lamp
Drying TimeÂ Touch To Dry Hard Dry Pre & Post Heating of PCB For coating @ 50^oC	5- 7 Min 2 Hrs Dry with - 1 Minute Hard Dry- 5-10 Min
Curing Time	12-24 Hrs
Optimum Properties - Provides Protection Against High Voltage Arcing and crona shorts	7 Days