- GST: 27AAHFC0282F1ZP
- sales@coninsindia.com
- +91 9545521323
ISO 9001-2015, ISO 14001-2015, C-DOT APPROVED, MIL STANDARD MIL-I-46058-C TYPE AR, ROHS COMPLIANCES, REACH COMPLIANCES, G1 G2 G3 COMPLIANCES
PCB Conformal Coating ( Acrylcoat - AR-30 )
We are Manufacturer, Supplier, Exporter of PCB Conformal Coatings, Acrylcoat Conformal Coatings and our setup is situated in Pune, Maharashtra, India. We target customers from ALL OVER THE WORLD.
Conins Acrylcoat is a high quality flexible transparent ECO FRIENDLY Acrylic Conformal Coating For PCB Assemblies.
Conins Acrylcoat is approved by C DOT and it conforms to MIL Standard: MIL - I - 46058C Type AR.
Conins Acrylcoat ensures total protection for PCBs and components against moisture, Oxidation, fungus etc., in extremely humid conditions. It is easy to apply and fast drying and has good flexibility. Servicing is easy as the coating is readily SOLDERABLE. Acrylcoat has high dielectric strength and it provides protection against high voltage arcing and corona shorts.
Special Features:
- 100% Eco - Friendly
- Economical in use.
- Good Dielectric strength
- Excellent adhesion to all Conformals
- Easily SOLDERABLE ; Servicing is easy.
- Prevents fungus growth
- Protects component leads from corrosion
- Fast curing
- Contains UV Tracer for easy inspection
Key Features:
- AEROSOL: Clean the Conformal thoroughly. Spray Acrylcoat from a distance of 25 cms. from the Conformal evenly. Allow the PCBs to dry in Air. Better results can be obtained if cured in a ventilated oven @ 60°C for 1 hr. The boards may be heated to 55 to 60°C just before spraying. SHAKE THE AEROSOL BOTTLE WELL BEFORE EACH APPLICATION
- LACQUER: ACRYLCOAT LACQUER can be applied by Brushing, Dipping or by Spraying. This can be used in a Dip Coating Machine or can be applied by a dispenser.
- REMOVAL: The coating can be removed using Conins Thinner AR.
- STORAGE: Store in a cool dry place below 40°C. Keep away from naked flame or flammable material. The contents are highly inflammable. Destroy the container after use.
- PRECAUTIONS: Acrylcoat is a flammable material. Contact with skin or eyes and inhalation should be avoided. In case of contact, wash the affected areas with soap and plenty of water. Keep away from open flames and Flammable material. Use in an adequately ventilated area only.
| PRODUCT CODE | Acrylcoat - AR-30 |
|---|---|
| Appearance (Liquid & Coated Film) | Clear / Transparent / Smooth & Glossy |
| Specific Gravity (Density @25°C) | 0.85 to 0.9 |
| Viscosity @25°C | 30–35 sec (Zans G1 Cup) |
| Flash Point | < 40°C |
| Comparative Tracking Index (CTI Value) | 600 |
| Coating Thickness (Single / Double Light Coat) | 20–22 μm Recommended |
| Dielectric Strength | 30 KV/mm |
| Thermal Cycling (MIL-I-46058-C-AR) | Meets Approval (C-DOT) |
| Moisture Resistance (MIL-I-46058-C-AR) | Meets Approval (C-DOT) |
| Insulation Resistance | Meets Approval (C-DOT) |
| Fungus Resistance | Passes |
| Withstand Temperature (Film) | -50 to 130°C |
| Coverage Area (20 μm Film – 500 ml Aerosol) | 6 m² |
| Film Traceable | Under UV Lamp |
| Drying Time - Touch to Dry - Hard Dry - Pre & Post Heating of PCB @50°C |
- 5–7 Min - 2 Hrs - Dry: 1 Min - Hard Dry: 5–10 Min |
| Curing Time | 12–24 Hrs |
| Optimum Properties | Provides protection against high voltage arcing and corona shorts — 7 Days |
