- GST: 27AAHFC0282F1ZP
- sales@coninsindia.com
- +91 9545521323
ISO 9001-2015, ISO 14001-2015, C-DOT APPROVED, MIL STANDARD MIL-I-46058-C TYPE AR, ROHS COMPLIANCES, REACH COMPLIANCES, G1 G2 G3 COMPLIANCES
PCB Conformal Coating Acrylcoat - SKR-70
We are Manufacturer, Supplier, Exporter (and also Services Provider) of Coatings For Automobile Electronics. Our company is located in Pune, Maharashtra, India. We target customers from ALL OVER THE WORLD.
Our product, Conins Acrylcoat SKR 70, is a high-quality, flexible, and transparent acrylic conformal coating designed for PCB assemblies. Acrylcoat SKR 70 is specifically formulated for applications requiring a higher coating thickness to ensure enhanced protection against moisture. It can be applied using a dispenser or by brushing and then cured in an oven at 80oC for 60 minutes. If a thicker coating is desired, additional coats can be applied, and the curing process can be repeated.
Conins Acrylcoat provides reliable protection for PCBs and components, safeguarding them against moisture, oxidation, fungus, and other environmental factors, particularly in highly humid conditions. With its high dielectric strength, Acrylcoat offers excellent insulation properties, ensuring protection against high voltage arcing and corona shorts.
Special Features:
- 100% Ozone Friendly
- Economical in use
- Good Dielectric strength
- Excellent adhesion to all Conformals
- Prevents fungus growth
- Protects component leads from corrosion
Applications :
- Before applying Acrylcoat Lacquer, ensure that the Conformal is thoroughly cleaned. It is recommended to pre-dry the Conformal at 60oC in a clean oven. Acrylcoat Lacquer can be applied using various methods such as brushing, dipping, or spraying. It can be conveniently used with a dip coating machine or a dispenser./li>
- STORAGE : To maintain the quality of the product, store Acrylcoat Lacquer in a cool and dry place below 40oC. Keep it away from naked flames or any flammable materials. Please note that the contents are highly inflammable, so it is important to destroy the container after use. The shelf life of the lacquer is 12 months when kept in its original sealed container.
- Shelf life: 12months in original sealed containers.
- PRECAUTIONS: Acrylcoat Lacquer is a flammable material, so it is essential to avoid any contact with the skin, eyes, or inhalation. If any contact occurs, immediately wash the affected areas with soap and plenty of water. Keep the product away from open flames and other flammable materials. Ensure that you use it in a well-ventilated area. It is advisable to refer to the Material Safety Data Sheet (MSDS) before using the product.
- Packing : Acrylcoat Lacquer is available in the following packaging options: 1 litre x 8 nos, 5 litres x 3 nos, and 25-litre containers.
- REMOVAL : To remove the coating, you can use Conins Pune Make Elclean Thinner AR.
| PRODUCT CODE | Acrylcoat - SKR-70 |
|---|---|
| Appearance (Liquid & Coated Film) | Clear / Transparent / Smooth & Glossy |
| Specific Gravity (Density @25°C) | 0.85 to 0.91 |
| Viscosity @25°C | 200 - 210 sec (Zans Cup #2) |
| Flash Point | < 79°C |
| Comparative Tracking Index (CTI Value) | 600 |
| Coating Thickness (Single Coat) | 200 - 250 μm Recommended |
| Dielectric Strength | 25 KV/mm |
| Thermal Cycling (MIL-I-46058-C-AR) | Passes as per MIL-STD |
| Moisture Resistance (MIL-I-46058-C-AR) | Passes as per MIL-STD |
| Insulation Resistance (MIL-I-46058-C-AR) | Passes as per MIL-STD |
| Fungus Resistance (MIL-I-46058-C-AR) | Passes as per MIL-STD |
| Withstand Temperature (Film) | -50 to 130°C |
| Coverage Area (20 μm Film – 500 ml Aerosol) | 3 - 4 m² |
| Film Traceable | Under UV Lamp |
| Drying Time (Touch to Dry) | 20 -25 Min @ Room Temp. |
| Hard Dry | 5 Hrs @ Room Temp. |
| Pre Heating of PCB @50°C (Touch to Dry) | 10 -15 Min |
| Post Heating of PCB @50°C (Hard Dry) | 20 - 25 Min |
| Curing Time | 18 - 24 Hrs |
| Optimum Properties | 7 Days |
| Packing | 1, 5, 25 Litre |
